Panasonic DP-1810F Operating Instructions Manual page 138

Troubleshooting
Mode
Communication
No Unit Operation
138
Symptom
No dial tone 1. Check the telephone line connection.
2. Check the telephone line.
1. Check the telephone line connection.
No auto answer 2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
Cannot transmit or An information code will be shown on the display. Refer to the
receive information code table to find the trouble.
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again.
Cause / Action
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 100th transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
Page
142
142
60
139
11