Adjusting the Volume
General Description
You can adjust the monitor and ringer volume on your machine. The built-in speaker enables you to hear the
dial tone, dialing signals, and busy tone. The ringer sounds when your machine receives a call.
Setting the Monitor Volume
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
You will hear the dial tone through the speaker.
2
or
3
1. You can also adjust the volume of the key touch tone and the volume of the buzzer in the Fax
NOTE
Parameter No. 10 (KEY/BUZZER VOLUME). (See page 29)
repeatedly to raise the volume.
repeatedly to lower the volume.
to select the "FAX/EMAIL MODE".
* MONITOR *
MONITOR VOLUME
LOW [
] HIGH
MONITOR VOLUME
LOW [
] HIGH
15