Basic Transmission Settings; General Description; Contrast; Resolution - Panasonic DP-1810F Operating Instructions Manual

Basic Transmission Settings

General Description

You can temporarily change the transmission settings either before or after you place the document on the
ADF.
These settings are as follows
After your document(s) have been sent, your machine will automatically return to the preset settings.

Contrast

Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press
LIGHTER

Resolution

Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press
RESOLUTION
NOTE
34
• Contrast
• Resolution
• Original (Text/Photo)
or :
DARKER
to:
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01.
(See page 29)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02.
(See page 29)
3. If you send a photographic original with gray tones, your machine is automatically set the
Resolution to FINE or S-FINE (406 x 391 dpi) and the Original setting to Text/Photo or Photo.
The reproduction of the received document will be determined by the capability of the remote
station.
• Stamp
• Communication Journal
• Password-XMT
for standard originals
for detailed originals
for finer detailed originals