Panasonic DP-1810F Operating Instructions Manual page 140

Troubleshooting
Information Codes
Info.
Code
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
492/493/ Communication error occurred while receiving.
494
495 Telephone line disconnected.
501/502 Communication error occurred using the internal V.34
Modem.
540/541/ Communication error occurred while transmitting.
542/543/
544
550 Telephone line disconnected.
552/ Communication error occurred while receiving.
553/554/
555
580 Sub-address transmission to a unit that has no Sub-
address function.
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
870 Memory overflow occurred while storing documents
into memory for transmission.
NOTE
140
Meaning
confidential document.
1. After identifying the problem and verifying the recommended action, if the information Codes
keep reoccuring or for help on Information Codes that appear on your machine but are not
listed above, please contact your local Panasonic Authorized Dealer.
(For mechanical failures, see the Troubleshooting section in the Operating Instructions (For
Copier) page 46)
Action
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
Check with the other party.
Check with the other party.
Check with the other party.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
1. Transmit documents without storing them
into memory.
2. Install Optional Memory Card.
Page
78
--
--
--
--
--
--
118
118
--
--
--
--
47