Customizing Your Machine; General Description; Setting The Fax Parameters - Panasonic DP-1810F Operating Instructions Manual

Customizing Your Machine

General Description

Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.

Setting the Fax Parameters

Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
4
5
6
NOTE
28
Enter Fax Parameter number from the Parameter Table.
(See page 29 to 31)
Ex: for STAMP
0 0 4
Ex: for ON
2
To set another parameter, press
Step 3 or press
STOP
1. To scroll the Fax Parameters in Step 2, press
2. To print out a Fax Parameter List, see page 133.
to return to
CLEAR
to return to standby.
to select the "FAX/EMAIL" mode.
SET MODE
ENTER NO. OR
FAX PARAMETER(1-99)
NO.=❚
FAX PARAMETER(1-99)
NO.=004
04 STAMP(HOME)
1:OFF
04 STAMP(HOME)
2:ON
05 MEMORY(HOME)
2:ON
or .
(1-4)
∨ ∧