Redialing - Panasonic DP-1810F Operating Instructions Manual

Digital imaging system
Hide thumbs Also See for DP-1810F:
Table of Contents

Advertisement

Sending Documents

Redialing

Automatic Redialing
If a busy line is detected, the machine will redial the number up to 5 times
at 3 minutes interval. However, if a busy line is not detected, the machine
will redial only one time. During that time, a message will appear as shown
to the right.
A file number is shown in the upper right hand corner of the display if it is a
memory transmission file.
Manual Redialing
You can also redial the last dialed number manually by pressing
To redial the last dialed number through memory
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
1b
2
3
NOTE
58
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
1
Press
2
ORIGINAL SIZE
The document is stored into memory with a file number.
Then dials the last dialed number.
1. While the unit is displaying "WAIT TO DIAL", you can press
immediately.
REDIAL
to select the original size.
WAIT TO DIAL NO.001
(Telephone number)
key.
to select the "FAX/EMAIL MODE".
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE *
PAGES=001
* DIALING *
5551234
to start redialing
REDIAL
NO.002
01%
NO.002

Advertisement

Table of Contents
loading

Table of Contents