B
r
i
d
g
e
B
r
i
d
g
e
General page lets you set the first channel. As to set the third channel, please click the Bridge
tab to open Bridge configuration page.
Available settings are explained as follows:
Item
Enable
P1 to P4
Click Clear to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click OK to save and exit this page. Or click Cancel to abort
the configuration and exit this page.
Description
Check this box to enable that channel. Only channel 3 to 8
can be set in this page, for channel 1 to 2 are reserved for
NAT using.
It means the LAN port 1 to 4. Check the box to designate
the LAN port for channel 3 to 8.
83
Vigor2850 Series User's Guide