Draytek Vigor2850 Series User Manual page 146

Available settings are explained as follows:
Item
Enable this account
User Name
Password
Confirm Password
Idle Timeout
Max User Login
Policy
Vigor2850 Series User's Guide
Description
Check this box to enable such user profile.
Type a name for such user profile (e.g.,
LAN_User_Group_1, WLAN_User_Group_A,
WLAN_User_Group_B, etc). When a user tries to access
Internet through this router, an authentication step must be
performed first. The user has to type the User Name
specified here to pass the authentication. When the user
passes the authentication, he/she can access Internet via this
router. However the accessing operation will be restricted
with the conditions configured in this user profile.
Type a password for such profile (e.g., lug123,
wug123,wug456, etc). When a user tries to access Internet
through this router, an authentication step must be
performed first. The user has to type the password specified
here to pass the authentication. When the user passes the
authentication, he/she can access Internet via this router
with the limitation configured in this user profile.
Type the password again for confirmation.
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 10 minutes.
Such profile can be used by many users. You can set the
limitation for the number of users accessing Internet with
the conditions of such profile. The default setting is 0 which
means no limitation in the number of users.
It is available only when User-Based mode selected in
User Management>>General Setup.
Default – If you choose such item, the filter rules
pre-configured in Firewall can be adopted for such user
profile.
Create New Policy – If you choose such item, the
following page will be popped up for you to define another
filter rule as a new policy.
136