Active Mode
Backup Type
W
A
N
2
W
A
N
2
WAN2 is fixed with physical mode of Ethernet.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Vigor2850 Series User's Guide
w
i
t
h
E
t
h
e
r
n
e
t
w
i
t
h
E
t
h
e
r
n
e
t
Choose Always On to make the WAN1 connection being
activated always;
If you choose Backup as the Active Mode, Backup Type
will appear. Please specify which WAN will be the Backup
interface.
When any WAN disconnect – Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect – Such backup WAN will be
activated only when all master WAN interfaces disconnect.
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
52