Table of Contents
Advertisement
When you check IPSec, you will see the following graphic:
Available settings are explained as follows:
Item
Profile Name
User Name
Password
Pre-Shared Key
Confirm Pre-Shared
Key
Digital Signature
(X.509)
Peer IP/VPN Client
IP
Peer ID
Remote Network IP
Remote Network
Mask
Description
Type a name for such profile. The length of the file is
limited to 10 characters.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
Type the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Use the drop down list to choose one of the certificates for
using. You have to configure one certificate at least
previously in Certificate Management >> Local
Certificate. Otherwise, the setting you choose here will not
be effective.
Type the WAN IP address or VPN client IP address for the
remote client.
Type the ID name for the remote client.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Please type the network mask (according to the real location
of the remote host) for building VPN connection.
201
Vigor2850 Series User's Guide
Advertisement
Table of Contents
