Table of Contents
Advertisement
ISP Access Setup
ISDN Dial Backup Setup
MTU
PPP Setup
IP Address Assignment
Method(IPCP)
Disable – Click this radio button to close the connection
through PPTP or L2TP.
Server Address - Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address – Specify the gateway IP
address for DHCP server.
Username -Type in the username provided by ISP in this
field.
Password -Type in the password provided by ISP in this
field.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and
you can use the number that you have set in that web page.
This setting is only available for the router supporting
ISDN function.
Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click ISDN >
Dialing to a Single ISP to create the backup profile.
None - Disable the backup function.
Packet Triggering -The backup line is not on until a packet
from a local host triggers the router to establish a
connection.
It means Max Transmit Unit for packet. The default setting
is 1442.
PPP Authentication - Select PAP only or PAP or CHAP
for PPP.
Idle Timeout - Set the timeout for breaking down the
Internet after passing through the time without any action.
WAN IP Alias - If you have multiple public IP addresses
and would like to utilize them on the WAN interface, please
use WAN IP Alias. You can set up to 8 public IP addresses
other than the current one you are using.
69
Vigor2850 Series User's Guide
Advertisement
Table of Contents
