Item
WAN IP
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Back
Next
Cancel
3.
Please type in the IP address information originally provided by your ISP. Then click
Next for next step.
4.
Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
Description
Type the IP address.
Type the subnet mask.
Type the IP address of gateway.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
31
Vigor2850 Series User's Guide