Available settings are explained as follows:
Item
Enable SMS Setup
Profile Name
Service Provider
Username
Password
Destination Number
Quota
Sending Interval
Send a test Message
Description
Click Enable to enable SMS function.
Click Disable to close SMS function.
Type a name for such SMS profile.
Use the drop down list to specify the service provider which
offers SMS service.
Type a user name that the sender can use to register to
selected SMS provider.
Type a password that the sender can use to register to
selected SMS provider.
Type the telephone number that you want it to receive the
SMS.
Type the total number of the messages that the router will
send out.
Type the shortest time interval for the system to send SMS.
For example, it is set with 60 (seconds). If WAN1
disconnects for three times within 60 seconds, the system
will send the SMS notification just for once.
Send one SMS to the user just for test.
191
Vigor2850 Series User's Guide