Table of Contents
Advertisement
Management Port Setup
F
o
r
I
P
v
F
o
r
I
P
v
Available settings are explained as follows:
Item
Management Access
Control
Access List
Vigor2850 Series User's Guide
User Defined Ports - Check to specify user-defined port
numbers for the Telnet, HTTP and FTP servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
Enable SNMP Agent - Check it to enable this function.
Get Community - Set the name for getting community by
typing a proper character. The default setting is public.
Set Community - Set community by typing a proper name.
The default setting is private.
Manager Host IP - Set one host as the manager to execute
SNMP function. Please type in IP address to specify certain
host.
Trap Community - Set trap community by typing a proper
name. The default setting is public.
Notification Host IP - Set the IP address of the host that
will receive the trap community.
Trap Timeout - The default setting is 10 seconds.
6
6
Description
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet.
Check the box(es) to specify.
Enable PING from the Internet -
to enable all PING packets from the Internet. For security
issue, this function is disabled by default.
You could specify that the system administrator can only
304
Check the checkbox
Advertisement
Table of Contents
