Ending A Meeting Early At The In-Room Panel; Executing A Meeting Preset - AMX RMS Administrator's Manual

Ending a Meeting Early At The In-Room Panel

1.
Within the In-room page, press End Meeting. The Confirm Meeting End dialog box opens.
FIG. 174 Meeting End
2.
press Yes. Based upon your scheduling system's support of this feature, you will see either:
FIG. 175 Meeting End Confirmed / Unsuccessful

Executing a Meeting Preset

If a manually executed preset was created when the meeting was set, press Run Preset.
See Also...
RMS - Administrator's Guide
Confirmed - the meeting has been ended.
Unsuccessful - the meeting has not been ended.
Creating an Appointment section on page 182.
Creating a New Macro section on page 105.
RMS Touch Panel Pages
195