Modify Parameter Page - AMX RMS Administrator's Manual

Modify Parameter Page

Make changes to existing device parameters via this page.
FIG. 70 Modify Parameter Page
Parameter Settings
• Name
• Current Value
• Threshold Operator
• Threshold
• Status Type
• Alert Template
• Advise when parameter
returns to normal range
• Advise Template
RMS - Administrator's Guide
The friendly name of the parameter.
You cannot change the value of this parameter.
The value of the parameter
A drop down selection the threshold designator for the parameter
The threshold value.
A drop down selection for the category to which the parameter belongs.
The notification template to use when the parameter's value is outside the normal
operating range.
Drop down selection of the types of alert templates available.
When checked, the RMS application sends a notification for a parameter when it
returns to its normal operating range.
The notification template to use when the parameter's value returns to the normal
operating range.
Drop down selection of the types of advise templates available.
Reset - Resets all settings for the parameter to default values.
Save - Confirms the changes for the parameter changes and returns to the Device Parameter Page
Cancel - Exits to the Device Parameter Page without saving changes.
System Status Page
77