Checking Client Licensing Information; Adding A Client License; Removing A Client License - AMX RMS Administrator's Manual

Configuration Page
System Licensing (Cont.)
• Status
• Count
• InUse
• Date
• Options
If the number of NetLinx connected systems is greater than the number of licenses available you can still track
them in the Unassigned NetLinx Systems section of the HotList. You will need more Client Licenses before
you can create rooms for these systems.
The RMS application can run without a license key. In Standard mode, you can run the RMS application with
limited capabilities for previewing the functionality of the software:

Checking Client Licensing Information

1.
Select Configuration > Licensing in the menu on the left side of the RMS application. The System
Licensing page opens.
2.
All available license information is listed in this table.

Adding a Client License

1.
Select Configuration > Licensing in the menu on the left side of the RMS application. The System
Licensing page opens.
2.
Click Add License to enable the Add Client License section.
3.
Type the AMX provided License Certificate and License Key in the available fields.
4.
Click Save to save, Cancel to cancel.

Removing a Client License

1.
Select Configuration > Licensing in the menu on the left side of the RMS application. The System
Licensing page opens.
2.
Click Remove for the selected license.
3.
Confirm the removal of the license.
168
The current status of the license Certificate ID. Invalid licenses do not func-
tion.
Each client certificate has a quantity of client licenses.
The number of licenses in use on the selected Certificate ID.
The date the Certificate ID was registered with the RMS server.
Remove - Removes the Certificate ID and all of its licenses from the RMS
server.
No rooms without masters
No control function macro creation, scheduling, or execution
No external scheduling
Only 1 user other than admin
RMS - Administrator's Guide