Displaying The Resource Lookup Table; Debugging Page; Setting Debug Options And Debugging The Rms Server - AMX RMS Administrator's Manual

Displaying the Resource Lookup Table

1.
Select Help > System Diagnostics in the menu on the left side of the RMS application. Click the
Resources tab at the top of the page. The Resources page opens.
2.
Place a check in the box Display Resource Lookup Table to enable. Removing the check disables this
feature.

Debugging Page

The Debugging page allows you to enable detailed diagnostics information on the RMS server for tracking and
identifying errors as they occur at the server level. The debug server provides a console view for diagnostics
and debug messages.
To connect to the debug console, use a TELNET client and connect to the RMS server on the specified port.
Debugging
• Debug Server
Enabled
• Debug Server
Port
• Open Debug
Session
• Save
If configured to use port number 24, please note that this is not the default TELNET
port and you will have to specify the port number when establishing a TELNET based
connection. If a firewall or router is blocking this port you will not be able to remotely
access the RMS debug console.

Setting Debug Options And Debugging The RMS Server

1.
Select Help > System Diagnostics in the menu on the left side of the RMS application. Click the
Debugging tab at the top of the page. The Debugging page opens.
2.
Place a check in the box Debug Server Enabled to activate the debugging tool.
3.
Set the Debug Server Port number in the field provided. The default port is 24.
4.
Click the link next to Open Debug Session to open a telnet session to the RMS server.
5.
Click Save when you are finished.
RMS - Administrator's Guide
When checked, RMS creates a debug server.
Note: The Debug Server Enabled option should not be left on in a production running envi-
ronment. This option is used for support and in-depth diagnostics of the RMS system. While
enabled, the system will generate a high volume of internal diagnostics messages and could
significantly impact the overall performance of the RMS application.
The port number for the Debug server. The default value is port 24.
Launches a telnet session to the Debug server.
Enacts changes to the Debugging server.
Help Page
173