Changing The Domain Path For Notifications; Management - Systems Page - AMX RMS Administrator's Manual

Changing the Domain Path For Notifications

By default, when a notification is sent out the link does not utilize the fully qualified domain name. You can
change the domain path such that those outside of the immediate network can use the link. To change the host
name:
1.
Stop all RMS services.
2.
Run C:\Program Files\ AMX Resource Management Suite\Scripts\RMS Hostname.vbs
3.
Click Yes.
4.
Enter the new hostname, e.g., rms.my-domain.com
5.
Click OK.
6.
Restart RMS services.

Management - Systems Page

The Management - Systems page allows you to browse the NetLinx masters connected to the RMS application
and inspect their configuration.
FIG. 83 Management - Systems Page
Management - Systems Page Options
• Serial Number
• IP Address
• Host Name
• MAC Address
• System Number This is the system number of the NetLinx master. The system number is used in master-to-
• Master Version
• Room Name
• Online
• Secure
• View
This table can be sorted by Serial Number, IP Address, Host Name, System Number,
Module Name, Master Version, and System Online.
RMS - Administrator's Guide
Serial Number associated with the room.
IP Address associated with the room.
Host Name associated with the room.
The MAC address associated with the room.
master configuration.
This is the firmware version of the NetLinx master.
The friendly name of the room in the event the NetLinx system is connected to the RMS
application.
Displays whether this NetLinx system is connected to the RMS application.
This displays a locked icon if both the Telnet and HTTP server are not open to anonymous
access.
Note: An unlock icon means one or both of these services is available to any user.
This button provides more details on the NetLinx masters configuration. Launches the View
System Page.
Management Page
97