Load From Touch Panel - AMX TPDOC Instruction Manual

Figure 33
F2-Print menu
Figure 34
Enter Device Number screen
Figure 35
Loading screen
TPDOC Touch Panel Documenter and Librarian Program

Load from touch panel

These steps describe how to set up your computer and load a touch panel print file.
Run the TPDOC program and press the F2–Print key to open the Print menu
1.
(Figure 33). Use the arrow keys to highlight the load option for your touch
panel. Refer to the file extension in parentheses to determine which file
options apply to your touch panel.
If your computer is connected to an AXCESS Control System, press Enter, enter
2.
the device number of your touch panel in the Enter Device Number screen
(Figure 34), and go to step 5. If your computer is connected directly to the
touch panel, go to the next step.
Put your touch panel in Editor mode. Select SYSTEM and then the PRINT
3.
menu option. A decision button appears on the touch panel.
4. Press NO for the RS–232 setup and YES to start the load operation.
Press the enter key on your computer keyboard. Figure 35 shows the Loading
5.
screen that appears during the load operation. The screen also shows the
number of bytes transferred during the load operation.
The Currently Loaded Pages screen (Figure 36) appears when the load
6.
operation is complete. At this point, you are ready to print the loaded pages or
store them on your computer to print at a later time.
Application and Use 21