Quality Of Service Reports - Device Control Failures - AMX RMS Administrator's Manual

Reporting Page

Quality of Service Reports - Device Control Failures

This report provides the count for each device NetLinx was not able to control within the parameters for all
rooms included in the report (FIG. 125). This report is based on the Control Failure parameter.
FIG. 125 Quality of Service Reports - Device Control Failures
Quality of Service Reports - Device Control Failures
• Period
• Options
• Residence
• Run Report Generates the report.
134
The time parameter the report is to run within. Click the calendar(s) to select a date; otherwise,
type the date in the field provided.
• On/After - Selects all instances on or after the designated date.
• On - Selects all instances on the designated date.
• On/Before - Selects all instances on or before the designated date.
• Between - Selects all instances between the designated dates.
• Any - Selects all instances.
• Device like - A keyword search for specific device items.
Failure Count:
• >= - Selects all instances that are greater than and equal to the number you place in the field.
• = - Selects all instances that are equal to the number you place in the field.
• <= - Selects all instances that are less than and equal to the number you place in the field.
• Between - Selects all instances that are greater than and equal to the number you place in the
field but less than and equal to the other number.
• Any - Selects all instances.
Select either All Residences or Selected Residences. The latter provides a list of rooms and
groups available within the RMS system.
RMS - Administrator's Guide