Connecting Loads; Figure 5-13 Agilent E6175A Load Mounting Area And P1/J1 Connectors - Agilent Technologies E6198B User Manual

5
Using Load Cards and Loads

Connecting Loads

Figure 5-13 Agilent E6175A Load Mounting Area and P1/J1 Connectors

5-20
Bridge Circuit on:
Channels 1 and 2
Channels 3 and 4
Channels 5 and 6
Channels 7 and 8
Bridge load flyback protection may be installed to power busses
as a normal load if jumpered, or channel to channel by installing
protection devices across the bridged channels.
Loads are mounted on the Agilent E6175A's sheet-metal
mounting area. The loads are wired to connector P1 which
mates to the Agilent E6175A's J1 connector.
the Agilent E6175A's load mounting area and connectors J1 and
P1.
Load Mounting Area
P1
Jumper Pins:
J6, 1 and 2
J6, 3 and 4
J7, 1 and 2
J7, 3 and 4
J1
E6198B Switch/Load Unit User Manual
Figure 5-13 shows