Backplane Connector Name; Backplane J1, J2 And J3 Connectors; Table 3-3 Backplane Connectors For E6198B; Table 3-4 Backplane Factory Default Connector Settings - Agilent Technologies E6198B User Manual

3
Switch/Load Unit and Plug-In Cards

Backplane Connector Name

Table 3-3 Backplane Connectors for E6198B

Backplane J1, J2 and J3 Connectors

Connector
J1
J2
J3
3-12
Table 3-3 lists the connectors on a E6198B backplane.
E6198B Reference Designator
J2
J3
J1
T1-T14
J101
J102
J104
J105
J106
J107
J108
J109
J110
J111
J201-J221
J801 & J802
J803
Table 3-4 shows the factory default configuration for the
backplane connectors.

Table 3-4 Backplane Factory Default Connector Settings

Default Setting
0 (Zero) Frame Select address 0-7. When using multiple Switch/Load Units
in your test system, Connector J1 provides a unique address for
each Switch/Load Unit. Factory default (one Switch/Load Unit) is
0.
Bussed Switch/Load Unit Current-Sense Bus
Local Switch/Load Unit Power Bus Sense select: Local/Remote
Description
SLU Current Sense: Bussed/Split
SLU Power Bus Sense Select: Local/Remote
Frame Select
SLU Logic Power Supply Connector
To USB Controller Connector
Utility Connector
External Reset (reserved)
+5V Indicator (+5V Status)
+12V Indicator (+12V Status)
-12V Indicator (-12V Status)
READY Indicator (Control Status)
+12V Output For Fan
+12V Output For Fan
+12V Output For Fan
Load Card Slots Connector
Power Busses PB1-PB4
Sense For PB1-PB4
Description
E6198B Switch/Load Unit User Manual