Agilent Technologies E6198B User Manual page 243

Bit 7
Purpose K16
CH16
Setting state
Bit 7
Purpose K24
CH24
Setting state
E6198B Switch/Load Unit User Manual
• Write Only
• State: 1 = NO shorted to COM, NC is open; 0 = NC shorted to
OM, NO is open
• Power On/Reset State = 0
Power Select 9-16 (W) Base + 8h
This register controls the Pull Up/Down Power Select armature
relays for channels 9-16. These relays are Form C and the
register uses positive logic: 1 = NO shorted to COM, NC is open;
0 = NC shorted to COM, NO is open. The power buses selected
are determined by how the card is configured. Writing to this
register starts the relay timer.
6 5
K15 K14
CH15 CH14
state state
• Write Only
• State: 1 = NO shorted to COM, NC is open; 0 = NC shorted to
COM, NO is open
• Power On/Reset State = 0
Power Select 17-24 (W) Base + 9h
This register controls the Pull Up/Down Power Select armature
relays for channels 17-24. These relays are Form C and the
register uses positive logic: 1 = NO shorted to COM, NC is open;
0 = NC shorted to COM, NO is open. The power buses selected
are determined by how the card is configured. Writing to this
register starts the relay timer.
6 5
K23 K22
CH23 CH22
state state
4 3
K13 K12
CH13 CH12
state state
4 3
K21 K20
CH21 CH20
state state
Register Definitions
2 1
K11 K10
CH11 CH10
state state
2 1
K19 K18
CH19 CH18
state state
B
0
K9
CH9
state
0
K17
CH17
state
B-27