Sweep Parameter Reading Fields; Marker Status Fields - Agilent Technologies 4294A Operating Manual

Table 3-1 Types of softkey options and their functions
Type of softkey option
Softkey label for setting a
parameter
Softkey label for
executing a function
1. These softkey labels are displayed without any special symbol.
NOTE Some softkey labels combine two or more of the functions shown in Table 3-1. For
example, the
[Sweep]
sub-menu for editing the list.
Some of the softkey labels currently displayed may not be available depending on the
current context; such softkey labels are dimmed by displaying them at a lower contrast than
the other labels. When you choose the appropriate context by using another key, those
softkey labels will revert to the normal contrast and become available.

6. Sweep Parameter Reading Fields

These fields show the sweep parameter values that correspond to the current marker
position for Traces A and B.

7. Marker Status Fields

These fields provide textual representation of the current status of the marker facility.
Marker couple mode
Cpl
Marker search track mode
Max
Min
Targ
Chapter 3
Pressing the corresponding softkey displays the function's
current setting in the Parameter Setting field in the
1
upper-left part of the screen and allows you to change the
current setting with the Entry block keys (for example,
[Bw/Avg]
Pressing the corresponding softkey immediately executes
the associated function (for example,
1
MKR®START
key, which can be accessed through the keystroke sequence
EDIT LIST
- , both turns on "sweep list edit mode" and displays a softkey
EDIT LIST
Indicates that the marker facility is currently in couple mode. In this
mode, changes to Traces A and B are synchronized.
Indicates that the marker facility is currently in search track mode and
configured to detect the maximum value. The main marker moves to
the maximum value on the trace each time one sweep cycle is
completed.
Indicates that the marker facility is currently in search track mode and
configured to detect the minimum value. The main marker moves to
the minimum value on the trace each time one sweep cycle is
completed.
Indicates that the marker facility is currently in search track mode and
configured to detect the specified target value. The main marker
moves to the target value on the trace each time one sweep cycle is
Front/Rear Panel and LCD Display
Items Displayed on the LCD
Function
- ).
AVERATING FACTOR
[Marker]
).
-
55