To Measure Dut; To Display The Trace Of All Channel; To Measure A Dut On Di Erent Sweep Parameter; To Setup Measurement - Agilent Technologies E5100A User Manual

To measure dut

To display the trace of all channel

To measure a dut on di erent sweep parameter.

To setup measurement

5-2 Analyzer Feature T utorial
8. Verify that \ Cor " is displayed on the left side of the display to
show that the calibration done for channel 1.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
9. Press ACTIVE CH [CH1] to change to
10. Connect that thru between RF OUT and input B.
11. Press
NNNNNNNNNNNNNNNNNNNNNNNNNN
RESPONSE
12. The
NNNNNNNNNNNNNN
THRU softkey label is underlined when the measurement is
completed.
13. Press
NNNNNNNNNNNNNNNNN
DONE: .
14. Verify that \ Cor " is displayed on the left side of the display to
show that the calibration done for channel 2.
1. Connect dut between RF OUT1 and input A.
2. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH1] to observe the trace for channel 1.
3. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
AUTO SCALE to scale automatically for channel 1.
4 5
Display
4. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] to observe the trace for channel 2.
5. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
AUTO SCALE to scale automatically for channel 2.
4 5
Display
1. Press
NNNNNNNNNNNNNNNNNNNNNNNNNN
MULTI CH to change
4 5
Display
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MULTI CH ON off .
2. The all traces of channel 1 and channel 2 are displayed.
3. Verify that two \ Cor " is displayed on the left side of the display.
The upper one is for channel 1 and the lower one is for channel 2.
1. Press
4
Meas/Format
2. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
COUPLED CH to change
4 5
Sweep
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
COUPLED CH on OFF .
3. Con rm that the
is displayed. When the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] to change the active channel to channel 1.
4. Press
4
Meas/Format
5. Press
NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOGMAG & PHASE .
FORMAT
NNNNNNNNNNNNNN
THRU .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MULTI CH on OFF to
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNN
2 .
NUM of CH
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
COUPLED CH ON off to
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH1] at the bottom of softkey
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] is displayed, press
NNNNNNNNNNNNNN NNNNNNNNNNN
A/R .
MEAS
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] .