Selecting The Graph Axis Format; When Using Cartesian Coordinates - Agilent Technologies 4294A Operating Manual

Setting Up the Display of Measurement Results

Selecting the Graph Axis Format

Selecting the Graph Axis Format

When Using Cartesian Coordinates

Unless the Agilent 4294A is configured to perform a COMPLEX Z-Y measurement
(complex impedance for Trace A, complex admittance for Trace B), it displays
measurement results in a Cartesian-coordinate graph whose horizontal and vertical axes
indicate the sweep and measurement parameter values, respectively. Use the following
procedure to select the vertical axis format for a Cartesian-coordinate graph:
Step 1. Activate the trace for which you want to set the axis format.
To activate:
Trace A
Trace B
Step 2. Press the
Step 3. Select the desired vertical axis format by pressing the appropriate key:
To select:
Linear
Logarithmic
NOTE The horizontal axis format is automatically determined based on the selected sweep type.
160
key to display the Format menu.
[Format]
Press:
[A]
[B]
Press:
LIN
LOG
Chapter 7