Reading the Cable Fault Location Measurement
Read the measurement and save it if required. The result is shown on the screen.
Press the Marker front panel key to move the marker to the fault(s) of interest. An
example is shown in
1. Connect the cable under test to the power divider. The measurement will start
2. Using the rotary pulse generator (RPG) knob, position the marker (1) to the
3. Interpretation of the display:
Figure 3-4
Example Cable Fault Location Measurement Screen
Chapter 3
Figure
automatically.
fault of interest. Refer to
• Marker (1)
• Resolution (2)
• Distance-to-fault in meters (3)
3-4.
Figure
3-4.
Making Measurements
Making Cable Fault Measurements
21