Choosing The Labeling Format - Agilent Technologies WireScope 350 User Manual

8r…‡vs’vtÃ8‚ƒƒr…Ã8hiyvt
Tr‡‡vtÃVƒÃhÃ6ˆ‡‚‡r†‡

Choosing the Labeling Format

3−6
2 Select Create a New Site Name, then press Next. (The OK button
changes to a Next button when you select Create a New Site
Name.) The screen changes, to allow naming the site.
1RWH
U‚ÃpuhtrÇurÁh€rÂ…ÃyhiryvtÃs‚…€h‡Ãs‚…ÃhÃr‘v†‡vtÆv‡rÃ…r††Ã‡urÆv‡rÁh€rÇurÃ
yv†‡ÇurÃ†ryrp‡Ã@qv‡WvrÃhqÃ…r††ÃIr‘‡
3 Press the icon under
4 Press the keyboard keys to enter the site name, then press OK. The
keyboard closes.
The labeling format specifies the scheme used to label test records for
that site. This format is applied to the test report and to labels printed for
the job. There are three label format options:
• Simple has only one field, such as 'cable number". See page 3–7
for the Simple format configuration procedure.
• TIA-606-A complies with the TIA-606-A standard. See page 3–9
for the TIA-606-A format configuration procedure.
• Hierarchical has multiple fields, for designations such as
Building, Floor, Wall Plate, and Jack Number. See page 3–11 for
the Hierarchical format configuration procedure.
The onscreen keyboard opens.
@‡r…ÃIrÃTv‡rÃIh€r