Displaying The Measurement Results; Selecting The Display Format - Agilent Technologies NFA Series Quick Reference Manual

Making Basic Measurements

Displaying the Measurement Results

Displaying the Measurement Results
The following display format features are available:
• Graph, Table or Meter mode display
• Single or dual-graph display allowing any two available result types
to be displayed simultaneously
• Zoom to display only one result graph on the display
• Combine option to display two result types on the same graph
• Markers for searching the trace
• Display a live trace, a memory trace or both
• Save the current trace data to memory
• Switch the graticule on or off
• Switch display annotation on or off

Selecting the Display Format

You can display the measurement results in either:
• Graph format
• Table format
• Meter format.
To set the display format:
Step 1. Press the
Format
Step 2. Press the
Format
to select the display mode you want.
36
key.
menu key and select the , or
Graph Table Meter
menu key
Chapter 2