Table of Contents
Advertisement
Chapter 6. Diagnostics
HSSI and V.35 Diagnostic Options
The menu in Figure 6-5 appears if the selected DTE port is HSSI or
V.35. Descriptions of the menu selections follow the figure.
Data Mode
Ends a test already in progress.
Payload Loopback
This selection initiates a P
selected port rather than for the entire DS3. During this test, the
data is looped back in the network direction. Perform this test to
verify the integrity of the portion of the DS3 link connecting the
selected port of the T3SU 300 and the remote DTE. This test is non-
intrusive to the three other ports. See Figure 6-6 on page 99.
This test does not interrupt data flow from the network to the DTE,
but it does block all DTE-to-network data for the selected port.
98
Figure 6-5. HSSI or V.35 Port Diagnostics Menu
L
AYLOAD
T3SU 300 User Manual
test for all data on the
OOPBACK
61202217L1-1B
Advertisement
Table of Contents
