Figure 3-6. Port Configuration Menu (Ethernet Bridge Interface Card); Table 3-4. Ethernet Bridge Interface Port Configuration - ADTRAN T3SU 300 User Manual

Chapter 3. Configuration
Configuration Selections for Ethernet Bridge Interfaces
Figure 3-6 shows the Ethernet Bridge menu. Table lists the
configuration selections available for the Ethernet Bridge interface .

Figure 3-6. Port Configuration Menu (Ethernet Bridge Interface Card)

Selection
I T
NTERFACE YPE
P S
ORT TATUS
U
NALLOCATED
75 B
K LOCKS
P S
ORT TATE
P S
ORT TATE
54

Table 3-4. Ethernet Bridge Interface Port Configuration

Description
This read-only status field displays
that an Ethernet Bridge interface card is installed in the DTE Port card
slot.
This read-only status field displays
E , N I
RROR OR OT NSTALLED
Ethernet Bridge interface.
Displays the amount of bandwidth (in 75k increments) not already
allocated to any of the T3SU 300 DTE ports.
If an Ethernet Bridge module is installed but not currently in use, set to
D E
. Set to
ISABLED NABLED
Ethernet ports can be individually activated with the
associated with that port.
If an individual Ethernet port is not currently in use, set to
E
Set to to activate a port.
NABLED
T3SU 300 User Manual
ETHERNET BRIDGE
I , A
NACTIVE CTIVE
,
indicating the current status of the
to activate the interface. Each of the four
P
, indicating
, W ,
AITING
S
option
ORT TATE
D
.
ISABLED
61202217L1-1B