Idsl Setup; Ethernet Setup; Menu 2 - Idsl Setup; Figure - ZyXEL Communications Prestige 100L User Manual

2.8

IDSL Setup

This section describes how to configure the IDSL using Menu 2 – IDSL Setup. From the Main Menu,
enter 2 to open Menu 2.
Press Space Bar to Toggle.
The following table contains instructions on how to configure your IDSL setup.
FIELD
Service Since the Prestige can only act as an IDSL Client, there is only one
Type option available: IDSL Client.
B Channel There are three options available: Leased 128K and Leased 64K,
Usage
which is used to decide the IDSL line's speed; or Switch 64K for
Ascend MAX TNT IDSL-module. When the P100L is connected to the
P1600 as the Client router, then this option cannot be set by the user
as it is set on the P1600.
2.9

Ethernet Setup

This section describes how to configure the Ethernet-related information using Menu 3 – Ethernet Setup.
From the Main Menu, enter 3 to open Menu 3.
Hardware Installation and Initial Setup
Menu 2 – WAN Port Setup
Service Type: IDSL Client
B Channel Usage= Leased 128K
Press ENTER to Confirm or ESC to Cancel:

Figure 2-8

Menu 2 – IDSL Setup
Table 2-5 IDSL Setup Menu Fields
DESCRIPTION
Prestige 100L IDSL Router
EXAMPLES
IDSL Client
Leased 128K /
Leased 64K /
Switch 64K
2-9