Table of Contents
Advertisement
Prestige 100L IDSL Router
To make a server visible to the outside world, specify the port number of the service and the inside IP address
of the server in Menu 15 – SUA Server Setup.
3.5.1 Configuring a Server Behind the SUA
Do the following steps to configure a server behind SUA:
Step 1.
Enter 15 in the main menu to go to Menu 15 - SUA Server Setup.
Step 2.
Enter the service port number in the Port # field and the inside IP address of the server in the
IP Address field.
Step 3.
Press the [Enter] key at the "Press ENTER to confirm ..." prompt to save your configuration
after you define all the servers or press the [Esc] key at any time to cancel.
3-10
Figure 3-4
Example of a SUA Topology
Internet Access
Advertisement
Table of Contents
Troubleshooting
