Table of Contents
Advertisement
Prestige 100L IDSL Router
The following table describes the fields in the Generic Filter Rule Menu.
FIELD
Filter #
This is the filter set, filter rule coordinates, i.e., 2,3 refers to the second filter
set and the third rule of that set.
Filter Type
Use [space bar] to toggle between both types of rules. Parameters
displayed below each type are different.
Active
Select Yes to turn on the filter rule.
Offset
Enter the starting byte of the data portion in the packet that you wish to
compare. The range for this field is from 0 to 255.
Length
Enter the byte count of the data portion in the packet that you wish to
compare. The range for this field is 0 to 8.
Mask
Enter the mask (in Hexadecimal) to apply to the data portion before
comparison.
Value
Enter the value (in Hexadecimal) to compare with the data portion.
More
If Yes, a matching packet is passed to the next filter rule before an action is
taken; else the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched are N/A.
Log
Select the logging option from the following:
l
None – No packet is logged.
l
Action Matched – Only packets that match the rule parameters are
logged.
l
Action Not Matched – Only packets that do not match the rule
parameters are logged.
l
Both – All packets are logged.
Action
Select the action for a matching packet.
Matched
Action Not
Select the action for a packet not matching the rule.
Matched
Once you have completed filling in Menu 21.4.1.1 – Generic Filter Rule, press the [Enter] key at the
message [Press Enter to Confirm] to save your configuration, or press the [Esc] key to cancel. This data is
now displayed on Menu 21.1.1 – Filter Rules Summary.
6-12
Table 6-5
Generic Filter Rule Menu Fields
DESCRIPTION
OPTION
Generic Filter
Rule / TCP/IP
Filter Rule
Yes/No
Default = 0
Default = 0
Yes/No
None
Action
Matched
Action Not
Matched
Both
Check Next
Rule
Forward
Drop
Check Next
Rule
Forward
Drop
Filters
Advertisement
Table of Contents
Troubleshooting
