Set Lists; Sampling - Korg Kronos Operation Manual

RPPR does not start
Is the Sequencer P0: Play/REC RPPR setting checked?
(See "Using RPPR (Realtime Pattern Play/Record)" on
page 106.)
Are Assign, Pattern Select, and Track set correctly?
See "Using RPPR (Realtime Pattern Play/Record)" on
page 106.
If the MIDI Clock (Global P1: MIDI) parameter set to
Internal or Auto? See "MIDI Clock (MIDI Clock
Source)" on page 772 of the Parameter Guide.
Can't record on an audio track
Have you unchecked the Memory Protect Internal
HDD Save check box (Global P0)?
Have you set Track Select to the audio track you want
to record?
If you want to perform multi‐track recording (Multi
REC checked), is Play/Rec/Mute set to REC?
Are the audio input settings correct?
• Please see Audio input and output, and Audio
inputs don't work properly.
Is there space remaining on the disk?
• Delete unwanted WAVE files.

Set Lists

COMPARE doesn't affect Control Surface
When you're in Set List mode, the COMPARE button
acts on edits to the Set List, such as the sounds selected
for each Slot, hold times, comments, and so on.
Control Surface edits in Set List mode apply to the
Slot's Program, Combination, or Song, and not to the
Set List itself. This means that pressing COMPARE in
Set List mode will not revert such edits.

Sampling

Can't sample
Are the audio input settings correct?
• See "Audio inputs don't work properly" on
page 248
Is there enough free RAM memory for sampling?
Is there free space in memory? For more information,
see "0–1f: Free Sample Memory/Locations" on
page 684 of the Parameter Guide, and "0–9: Media
Information" on page 822 of the Parameter Guide.
• In order to sample to RAM memory, you must
allocate sufficient space for sampling.
• If you are sampling to disk, select a different disk.
For more information, see "Select Directory" on
page 149 of the Parameter Guide.
Troubleshooting Set Lists
• Save a copy of important WAVE files on external
media, and then delete them from the disk.
Are the REC Source settings correct?
A "File already exists" message appears, and you can't
record.
• In the P0: Play/REC– Preference page, change the
name of the WAVE file that you're going to record.
• Delete the files in the TEMP folder.
Can't import WAVE files into a region of
an audio track
In the Import Region/WAVE dialog box, you selected a
WAVE file but can't press the OK button.
• Only 44.1 kHz and 48 kHz WAVE files can be
imported.
• You can only directly import WAVE files from the
internal disk. To use files from CDs or external USB
devices, you must first copy them to the internal
disk, and then import the copied file into the Song.
Noise in sampled audio
If you use COMPARE or change the EXi Instrument
type in an EXi Program while recording a sample, this
can cause a glitch in the resulting sample.
To revert Control Surface edits made in Set List mode:
1. Go to the sound's native mode.
For instance, if the Slot contains a Program, go to
Program mode.
2. Press COMPARE.
The Control Surface edits will be reverted. You can
then return to Set List mode if desired.
• Delete unneeded samples. For more information,
see "Delete Sample" on page 726 of the Parameter
Guide.
• Save important samples on external media, and
then delete them from memory.
If you're sampling to the internal disk, did you
uncheck the Memory Protect "Internal HDD Save"
dialog box? (Global P0)
If you're sampling to external USB storage media, did
you select recordable media?
Is the Trigger setting correct? For more information,
see "Trigger" on page 19 of the Parameter Guide.
In Sampling mode if you are resampling with
Resample set to Auto, has the sample to be resampled
been assigned to the keyboard, and selected for Key?
"Applying an insert effect to a sample and resampling
the result" on page 138.
251