Creating songs (Sequencer mode)
7. Press the OK button, the selected region will be
placed in the audio track.
8. Select the event that you want to edit, and use the
location parameters "Measure" and "Beat Tick" to
edit the location of the event.
You can't place two or more events at the same
location.
9. Press the Done button.
10.Press the SEQUENCER START/STOP switch, and
make sure that the WAVE file plays back.
You can press the COMPARE switch to return to the
state prior to the edit you just performed.
We've kept this example simple, but you can also
perform editing operations such as changing the
playback position of the WAVE file in steps of a single
sample, changing the location relative to an anchor
point, or crossfading two audio events. For more
information, see "Audio Automation Edit" on page 641
of the Parameter Guide.
102