Using KARMA
If you turn "Solo" On (checked), only that KARMA
module will sound. This is useful when you are
selecting a GE, or when you want to audition the
phrase that a module is generating.
Modules whose "Solo" is On (checked) will sound
even if "Run" is Off (unchecked).
The "Solo" setting is cleared when you switch to
another combination. It is not saved when you write
the combination.
KARMA module A will sound.
KARMA module B will sound.
KARMA modules A and B will sound.
Note: If "
" is not shown in the display, "Run"
has been assigned as a performance realtime
performance. The KARMA SWITCHES etc. will
control "RUN."
KARMA module MIDI I/O channel
settings
The MIDI input/output channel setting for each
KARMA module and the MIDI channel setting of each
timbre together determine how the KARMA modules
will play the timbres.
If a KARMA module's MIDI output channel matches
the MIDI channel of a timbre, the phrase or pattern
generated by that KARMA module (if it's operating)
will play that timbre. For details on making these
settings, see "Editing KARMA in Combination mode"
on page 227 and "7–1c: MIDI I/O" on page 471 of the
Parameter Guide.
GE (Generated Effect) selection
Just as for a program, you can use the "GE Select" field
to select the GE used by each module. (See "Editing
KARMA in Combination mode" on page 227)
KARMA module parameter settings
For details on editing KARMA module parameters, see
"Editing KARMA in Combination mode" on page 227.
222