Event Messages - HP TR3271 Programming Manual

MANAGEMENT PROGRAMMING FOR TR3271

Event Messages

Table 2-3. CMI Commands and Programmatic Commands (Page 3 of 3)
CMI COMMAND
AND OBJECT TYPE
STATUS LINE,
DETAIL
STATUS SU,
DETAIL
STATUS LINE,
RESET
STATUS SU,
RESET
STOP LINE
STOP SUBDEVICE
TRACE LINE
For detailed descriptions of the CMI commands, refer to the
Communications Management Interface (CMI) Operator's Guide .
EVENT MESSAGES
An event message describes an event that has occurred in a
subsystem, such as a hardware error or a software error.
event messages are in SPI message format.
All event messages issued by the TR3271 subsystem are sent to
the EMS collector process ($0).
placed into the user-specified log files.
log files, the consumer distributor process can read the event
messages and retrieve the selected events for the management
application.
2-10
PROGRAMMATIC COMMAND
AND OBJECT TYPE
ZCOM-CMD-STATISTICS
ZCOM-CMD-STATISTICS
ZCOM-CMD-RESETSTATS
ZCOM-CMD-RESETSTATS
ZCOM-CMD-STOP
ZCOM-CMD-STOP
ZCOM-CMD-TRACE
These event messages are then
ZCOM-OBJ-LINE
ZCOM-OBJ-SU
ZCOM-OBJ-LINE
ZCOM-OBJ-SU
ZCOM-OBJ-LINE
ZCOM-OBJ-SU
ZCOM-OBJ-LINE
All
Once placed into the