HP TR3271 Programming Manual page 74

COMMANDS AND RESPONSES
ABORT Command
Tokens in Command Buffer
ZCOM-TKN-OBJNAME specifies the name of a TR3271 line or subdevice
that is to be terminated.
token in the command.
Communications Standard Definitions" in Section 5 and the
Communications Management Programming Manual .
ZCOM-MAP-REQID and ZCOM-TKN-CMD-TIMEOUT are standard data-
communications tokens that your application can optionally pro-
vide. These tokens are described in "Data-Communications
Standard Definitions" in Section 5 and the Communications
Management Programming Manual .
ZCOM-TKN-SUB specifies whether subordinates are to be affected by
the ABORT command.
this token are as follows:
ZCOM-VAL-SUB-ALL
ZCOM-VAL-SUB-ONLY
ZCOM-VAL-SUB-NONE
If the subordinate modifier is not present, the subsystem treats
the command as if the ZCOM-VAL-SUB-NONE value has been used.
This token is also described in "Data-Communications Standard
Definitions" in Section 5 and the Communications Management
Programming Manual .
(ZSPI-TKN-) MANAGER, SSID, MAXRESP, CONTEXT, RESPONSE-TYPE,
ALLOW-TYPE, and COMMENT are standard SPI tokens.
exception of the ZSPI-TKN-SSID token, which your management
application must pass to SSINIT, these tokens are optional.
These tokens are described in "SPI Standard Definitions" in
Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
6-10
Your application must provide this
This token is described in "Data-
For the ABORT command, the possible values of
If the object type is LINE, terminate the
named line and all its subordinate subdevices.
If the object type is SU, terminate the named
subdevice.
If the object type is LINE, terminate the
subdevices subordinate to the named line, but
do not terminate the line.
valid with the SU object type.
If the object type is LINE, terminate the
named line only if the subordinate subdevices
are currently in the STOPPED summary state.
If the object type is SU, terminate the named
subdevice.
This value is not
With the