HP TR3271 Programming Manual page 86

COMMANDS AND RESPONSES
ALTER Command
Tokens in Command Buffer
ZTR3-MAP-ALTER-LINE is the extensible structured token that
defines the configurable attributes that are to be altered for
the line. It has the token number ZTR3-TNM-ALTER-LINE and the
DDL definition ZTR3-DDL-ALTER-LINE.
command when the specified object is ZCOM-OBJ-LINE.
be in the command when the object is ZCOM-OBJ-SU.
occurrences of this token are not allowed.
Each attribute is defined in a separate field.
field must be specified.
extensible structured token are as follows:
ZBCCTYPE
ZCHARSET
ZCTL-RTS
ZCTL-SET
ZDEBUG
6-22
The fields in the ZTR3-MAP-ALTER-LINE
The block check character (BCC) type to be
used by the line.
indicates that the longitudinal redundancy check
(LRC8) will be used.
CRC16 indicates that the cyclic redundancy check
(CRC16) will be used.
CCITT indicates that the International Telegraph
and Telephone Consultative Committee check will
be used. The default value is ZTR3-VAL-BCC-
CRC16.
The character set to be used.
ZTR3-VAL-CHAR-ASCII indicates the ASCII character
set will be used.
indicates the EBCDIC character set will be used.
The default value is ZTR3-VAL-CHAR-EBCDIC.
A Boolean variable that specifies whether the
Carrier Detect (CD) signal is dropped before the
Request To Send (RTS) signal is raised.
value is ZSPI-VAL-TRUE, CD is dropped before RTS
is raised. If the value is ZSPI-VAL-FALSE, CD
is not dropped before RTS is raised.
value is ZSPI-VAL-FALSE.
An enumerated value that specifies the bisyn-
chronous control set.
SET-ASCII indicates that the ASCII control set
will be used. The value ZTR3-VAL-CTL-SET-EBCDIC
indicates that the EBCDIC control set will be
used. The default value is ZTR3-VAL-CTL-SET-
EBCDIC.
A Boolean variable that enables the CLIP DEBUG
interface. If the value is ZSPI-VAL-TRUE, the
interface is enabled.
FALSE, the interface is not enabled.
value is ZSPI-VAL-FALSE.
This token must be in the
At least one
The value ZTR3-VAL-BCC-LRC8
The value ZTR3-VAL-BCC-
The value ZTR3-VAL-BCC-
The value
The value ZTR3-VAL-CHAR-EBCDIC
The value ZTR3-VAL-CTL-
If the value is ZSPI-VAL-
It cannot
Duplicate
If the
The default
The default