Table of Contents
Advertisement
COMMANDS AND RESPONSES
ALTER Command
ZTR3-ERR-ALRDY-USING-ADDR (6)
Your management application attempted to alter the address of
a subdevice, but the address specified in ZADDR is already in
use by another subdevice.
not previously assigned.
ZTR3-ERR-ATTR-CONFL-SU (4)
An SU attribute conflicts with a LINE attribute.
field for an SU is defined as ZSPI-VAL-TRUE, but the LINE
attributes defined by the ZCHARSET, ZCTL-SET, ZXLATE, and
ZXPARENT fields are not properly specified.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list.
This token is described in "SPI Standard Definitions"
in Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Operational Notes
ALTER is a sensitive command.
When the command is completed, the line and subdevice remain
in the same state as they were before the command was
executed.
The LINE and SU objects must be in the STOPPED summary state
before their attributes can be altered, except when changing
the DEBUG attribute in the token ZTR3-MAP-ALTER-LINE.
To obtain attributes values of a line or subdevice, use the
INFO command.
6-30
The ZADDR field must have a value
The ZXPARENT
Advertisement
Table of Contents
