Table of Contents
Advertisement
COMMANDS AND RESPONSES
START Command
ZCOM-ERR-CMD-MISMATCH (-4)
Your management application tried to start a process by using
the value ZCOM-OBJ-PROC.
values ZCOM-OBJ-LINE or ZCOM-OBJ-SU.
ZCOM-ERR-CMD-INV-IN-SUMSTATE (-3)
Your management application tried to start a line or a
subdevice while the line was in the DIAGNOSING summary state.
The DIAGNOSING summary state prevents processing of the START
command for the LINE object and SU object, including times
when the ZCOM-VAL-SUB-ALL value is used.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list.
See "SPI Standard Definitions" in Section 5 for details.
ZSPI-TKN-CONTEXT specifies whether there are more reply messages
to be received for a response.
response continues to the next reply message.
not present, the reply message is the last to be received.
"SPI Standard Definitions" in Section 5 for details.
Operational Notes
START is a sensitive command.
When the command is completed, the object is placed in the
STARTED summary state.
If both a line and its subordinate subdevices are to be
started, the line is started first and then the subdevices are
started.
The line must not be in the DIAGNOSING or STARTED summary
state when this command is issued.
To terminate the operation of lines and subdevices, use the
ABORT or STOP command.
6-88
The command is valid only for the
If this token is present, the
If this token is
See
Advertisement
Table of Contents
