HP TR3271 Programming Manual page 88

COMMANDS AND RESPONSES
ALTER Command
ZMULTI-BLOCK
ZOFFLINE-TIMER
ZPROG
ZREAD-CMD
6-24
%value If the value of this field is any
16-bit octal value other than 0,
%177776, or %177777, the TR3271
subsystem responds with a RVI.
value in this field is interpreted
as IBM Status/Sense information.
The TR3271 subsystem will send these
bytes to the host when the host,
after receiving the RVI, polls the
subsystem.
correct format.
in the Device-Specific Access
Methods--AM3270/TR3271 for a list
of appropriate values.
A Boolean variable that specifies whether the
TR3271 subsystem supports multiple block trans-
missions. If the value is ZSPI-VAL-TRUE, the
subsystem supports multiple block transmissions;
if the value is ZSPI-VAL-FALSE, it does not.
default is ZSPI-VAL-FALSE.
A timestamp that specifies the period of time,
in .01 seconds, that the TR3271 subsystem waits
to receive a signal from the host.
TR3271 subsystem does not receive anything within
this interval, the host is considered down and a
timeout error is reported.
the 0 through 5:27:67 range.
wait forever.
A 32-byte file name that identifies the program
file that is to be downloaded to the CLIP.
default is $SYSTEM.CSS00.C9315P00.
An enumerated value that specifies whether the
TR3271 subsystem accepts the Read Buffer and
Read Modified command from the host.
ZTR3-VAL-READ-NONE causes the subsystem to reject
the Read Buffer and Read Modified commands.
value ZTR3-VAL-READ-ALL causes the subsystem to
accept both the Read Buffer and Read Modified
commands. ZTR3-VAL-READ-RDMOD causes the subsys-
tem to accept the Read Modified command, but
reject the Read Buffer command.
The Read Buffer command is supported only for
CRT subdevices.
specifies the ZTR3-VAL-READ-ALL for PTP
subdevices, Read Buffer commands are rejected.
This restriction is imposed by the protocol used
by PTP subdevices.
field is ZTR3-VAL-READ-NONE.
The value must be in the
Refer to Appendix C
The value must be in
The default is 0,
If your management application
The default value for this
The
The
If the
The
The value
The