HP TR3271 Programming Manual page 98

COMMANDS AND RESPONSES
CONNECT Command
The possible nonzero values of RETCODE in response to the CONNECT
command are as follows:
ZCOM-ERR-EMPT-RSP (-33)
ZCOM-ERR-TKN-VAL-INV (-30)
ZCOM-ERR-TKN-REQ (-29)
ZCOM-ERR-TKN-DUP (-27)
ZCOM-ERR-TKN-CODE-INV (-26)
ZCOM-ERR-SSID-INV (-24)
ZCOM-ERR-SECUR-VIOL (-22)
ZCOM-ERR-OBJNAME-INV (-19)
ZCOM-ERR-FNAME-INV (-9)
ZCOM-ERR-CMD-TIMED-OUT (-7)
ZCOM-ERR-PATH-DOWN (-20)
There has been an unexpected loss of the link between the
AM3270 and TR3271 subdevice.
ZCOM-ERR-OBJ-NOT-SUPP (-18)
Your management application has tried to build a link either
from an object that is not supported by the TR3271 subsystem,
or to an object not supported by the AM3270 subsystem.
CONNECT command is valid only for the object type ZCOM-OBJ-SU.
ZCOM-ERR-OBJ-NOT-FOUND (-17)
Your application has tried to build a link from a TR3271
subdevice that does not exist.
to determine the subdevices that exist and reissue the CONNECT
command with an appropriate subdevice.
ZCOM-ERR-CMD-MISMATCH (-4)
Your management application tried to build a link from a
process or line by using the object type ZCOM-OBJ-PROC or
ZCOM-OBJ-LINE, respectively.
the object type ZCOM-OBJ-SU.
ZCOM-ERR-CMD-INV-IN-SUMSTATE (-3)
Your management application tried to connect a subdevice while
the target AM3270 subdevice or the TR3271 subdevice was not
in the STARTED summary state.
one of the subdevices is in the DIAGNOSING or STOPPED summary
state.
ZTR3-ERR-TARGET-OBJ-NOT-FOUND (3)
Your management application tried to build a link to an AM3270
subdevice that does not exist.
6-34
Issue the LISTOBJECTS command
The command is valid only for
Or, the line associated with
The