HP TR3271 Programming Manual page 129

Tokens in Command Buffer
ZCOM-TKN-OBJNAME specifies the name of the object to be listed.
Your application must provide this token in the command.
token is described in "Data-Communications Standard Definitions"
in Section 5, "Common Definitions," and the Communications
Management Programming Manual .
ZCOM-MAP-REQID and ZCOM-TKN-CMD-TIMEOUT are standard data-
communications tokens that your application can optionally pro-
vide. These tokens are described in "Data-Communications
Standard Definitions" in Section 5 and the Communications
Management Programming Manual .
ZCOM-TKN-SUB specifies whether subordinates are to be affected
by the LISTOBJECTS command.
possible values of this token are as follows:
ZCOM-VAL-SUB-ALL
ZCOM-VAL-SUB-ONLY
ZCOM-VAL-SUB-NONE
If this token is not present, the effect is the same as if the
SUB modifier with the value ZCOM-VAL-SUB-NONE had been specified.
(ZSPI-TKN-) MANAGER, SSID, MAXRESP, CONTEXT, RESPONSE-TYPE,
ALLOW-TYPE, and COMMENT are standard SPI tokens.
exception of the ZSPI-TKN-SSID token, which your management
application must pass to SSINIT, these tokens are optional.
These tokens are described in "SPI Standard Definitions" in
Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Tokens in Response Buffer
ZSPI-TKN-SSID is an echo of the subsystem ID value provided by
your application.
for details.
For the LISTOBJECTS command, the
If the object type is LINE, list the named
line and all its subordinate subdevices.
the object type is SU, list the named subde-
vice only.
If the object type is LINE, list the subde-
vices subordinate to the named line; the line
is not to be affected by this command.
is not a valid value for the SU object type.
If the object type is LINE or SU, list the
named object only.
See "SPI Standard Definitions" in Section 5
COMMANDS AND RESPONSES
LISTOBJECTS Command
This
With the
If
This
6-65