Recording With A Cassette Deck - Pioneer VSX-D704S Operating Instructions Manual

RECORDING WITH A CASSETTE DECK
[ RECORDING WITH TAPE 1
If the TAPE 2 MONITOR button is ON, press to turn OFF.
1
\
1
1. Select the source you want to record from with the
input selector buttons.
When recording AM or FM broadcasts, select a preset
station using the MULTI-JOG. If the desired station has
not been preset, tune in the station.
2. Start recording on TAPE 1 cassette deck.
3. Play the desired program source (record, compact
disc, etc.).
The volume, balance, and tone controls have no effect
on the recording.
RECORDING WITH TAPE 2 ]
1. Select the source you want to record from with the
input selector buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact
disc, etc,).
The volume, balance, and tone controls have no effect
on the recording.
[ USING VCR 1,VCR 2 FOR AUDIO RECORDING ]
The audio signal output from the VCR 1 and VCR 2 AUDIO
OUT jacks is the same as that output from the TAPE 1 REC
jacks, so you can record using the same procedure as for
recording with TAPE 1.
[ COPYING TAPES ]
\
tD .<.oooooooo © O
The following operations concern TAPE 1 to TAPE 2 copying.
1. Press the TAPE 1 input selector button.
2. Load the TAPE 1 cassette deck with a tape to playback.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
5. Start playback on the TAPE 1 cassette deck.
The following operations concern TAPE 2 to TAPE 1 copying.
1. Select a source other than TAPE 1 with the input
selector buttons.
2. Press the TAPE 2 MONITOR button to turn it ON.
3. Load the TAPE 2 cassette deck with a tape to play back.
4. Load the TAPE 1 cassette deck with a tape to record to.
5. Start recording on the TAPE 1 cassette deck.
6. Start playback on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped with a
monitoring function, the recorded sound can be monitored through
the speakersystem by pressingthe TAPE2 MONITOR button to ON.
21
<ARB7035>