Pioneer VSX-D704S Operating Instructions Manual page 25

] _._ C'_ Intelligent
REMO]E CON]ROL OPERATION System Control
l RECEIVER CONTROL BUTTONS
/
@ ! _ (.... c:3
_ Jr
( II )
( II )
©
r
@
--®
®
@
_J
RECEIVER POWER button
Switches the receiver power between ON and STANDBY.
]
_2_ENTER button
When GUI is ON, press to execute an operation selected
with the Select/Adjust buttons.
4_ ONE TOUCH OPERATION buttons
VCR 1/2,CD,LD,TAPE :
Pressing these buttons automatically calls up "ONE TOUCH
OPERATION SET UP" settings, made using GUI. (P. 36}
TUNER :
This switches power to the TUNER ON, and starts
reception of the last memorized station.
Also, if power to this unit is OFF, it is switched ON, and
operation automatically switches to the selected function.
When you press any of the ONE TOUCH OPERATION
buttons, the GUI MODE becomes off.
(_ FUNC. (function) button
Press to select the receiver input.
VCR 1--* VCR 2 --*VIDEO --*TV/SAT--*LD --I
D _ TUNER +--- PHONO "-- TAPE 1_
TAPE 2 (TAPE 2 MONITOR) button
Switches TAPE 2 MONITOR on/off.
VOLUME Jr-, -- buttons
Adjusts the overall volume.
G.U.I. button
Switches GUI MODE on and off.
When the GUI mode is ON, the Select/Adjust button <gj
(AS>,V,<_) lights.
M.CHECK (Mode check) button
Indicates whether the GUI MODE is on or off.
When it is on, A, D, v, <a light. When it is off, a (_ ONE
TOUCH OPERATION button lights to indicate the current
function.
If you press the button again while it is lit, remote control
functions change. When the remote control is in the GUI
mode, the @ Select/Adjust buttons (A, D, v, < ) light.
(_ Select/Adjust buttons (A, C>, V, <] )
When the GUI mode is ON, A,>,v, and <_ light.
When using the GUI function with the on-screen display, use for
such operations as selection and adjustments (by moving the
cursor).
When the GUI mode is OFF, use to operate other components.
MUTE button
Used to temporarily mute the sound. When it's in the on
position, the "MUTING" indicator lights. The volume is restored
when pressed again.
[ OPERATING OTHER COMPONENTS J
REMOTE CONTROLLING OF ANY OTHER
OF YOUR AUDIO-VISUAL COMPONENTS
VIA THIS UNIT REQUIRES:
All components must be remote controllable (have a sensor
window on the front panel) to receive a direct command
from this unit, upon successful learning of those
commands by this programmable unit,
When operating components other than the receiver:
1. Press the ONE TOUCH OPERATION button for the
component you want to operate.
2, Press the operation button.
NOTE:
Components that could not originally be operated by remote control
cannot be controlled by th_s unit's remote control.
25
<ARB7035>