Video Recording; Surround Effect And Dolby 3Ch Logic - Pioneer VSX-D704S Operating Instructions Manual

VIDEO RECORDING
Refer to the connection procedures on pages 8 to 12 and
refer to the VCR's Operating Instructions regarding proper
operation procedures. Recording can be performed on both
VCR 1 and VCR 2.
D:. ooooooooo ©i©
I" /
1. Select the source you want to record from with the
input selector buttons.
• When recording from a LaserDisc on VCR 1 orVCR 2 --* LD
• When recording from the TV tuner on VCR 1 or VCR 2
--* TV/SAT
• When recording from VCR 1 on VCR 2 --, VCR 1
•When recording from VCR 2 on VCR 1 --* VCR 2
• When recording on VCR 1 or VCR 2 from a component
connected to the front panel VIDEO INPUT jacks --, VIDEO
2,
3.
Start recording on the VCR.
For VCR, select a line
input
(external input).
Start playback on the component selected with the
input selector.
The volume, balance, and tone controls have no effect
on the recording.
NOTE:
When recording with VCR 1, be sure the input selector is set to a
position other than VCR 1. When recording with VCR 2, be sure the
input selector is set to a position other than VCR 2.
GUI operation enables easy copying from a Laserdisc to
VCR 1 (or 2), and copying between VCR 1 and VCR 2.
(Refer to page 32.)
SURROUND EFFECT AND DOLBY 3CH LOGIC
1
2.
Adjust levels to achieve a correct surround sound
reproduction.
This is done using GUI (page 28). For details concerning
how to perform level adjustment, refer to page 33.
1.
Select the desired mode with the DOLBY PRO-LOGIC
button, DSP MODE button, and DOLBY 3CH LOGIC
button.
The DSP MODE changes in sequence each time the DSP
MODE button is pressed. (The DSP MODE indicator lights.)
_,_JAZZ -_-DANCE ---*
SIMULATED SURROUND- I
off _ PRO-LOGIC THEATER 4--- HALL _* J
22
<ARB7035>