Table of Contents
Advertisement
RECORDING WITH TAPE 1
if the TAPE 2 MONITOR button is on, press to turn off.
TAPE 2 MONITOR
2. Start recording on TAPE 1 cassette deck.
RECORDING WITH TAPE 2
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
The volume, balance and tone controls have no effect on the
recording.
USING VCR 1, VCR 2 FOR AUDIO RECORDING
The audio signal output from the VCR 1 and VCR 2 AUDIO OUT
jacks is the same as that output from the TAPE 1 REC jacks, so
you can record using the same procedure as for recording with
TAPE 1.
COPYING TAPES
The following operations concern TAPE 1 to TAPE 2 copying.
. Press the TAPE 1 input selector button.
. Load the TAPE 1 cassette deck with a tape to playback.
. Load the TAPE 2 cassette deck with a tape to record to.
. Start recording on the TAPE 2 cassette deck.
. Start playback on the TAPE 1 cassette deck.
OPwn
The following operations concern TAPE 2 to TAPE 1 copying.
1. Select a source other than TAPE 1 with the input selector
buttons.
. Press the TAPE 2 MONITOR button to turn it on.
. Load the TAPE 2 cassette deck with a tape to playback.
. Load the TAPE 1 cassette deck with a tape to record to.
. Start recording on the TAPE 1 cassette deck.
. Start playback on the TAPE 2 cassette deck.
aQmeawn
Tape monitoring
When recording is performed on a cassette deck equipped with
a monitoring function, the recorded sound can be monitored
through the speaker system by pressing the TAPE 2 MON'TOR
button to ON.
19
<ARBiIOS1>
Advertisement
Table of Contents
